Pristine box, one of the best delivered |
Removed top styrofoam panel to see machine |
Before cleaning or polishing, an after photo will come when the wiring is fixed. |
OMIGOSH, what a poor job! |
The 301s are behaving and so is the 401. I still have to somehow fit the wires in the foot controller for my friend's White. I can't find one of those stoppers that fit in the hole to stop the wire from pulling out and there is not room enough to tie a knot. The Kenmore needs the tension finessed and it can go home. It never got warm enough here to strip the treadle cabinet as it did just south of here, so it waits. It is snowing and very cold, so I just want to sew, sew, sew. I need to do one more post to list my goals and I will be caught up.
3 comments:
If you are going to use it as a treadle, why worry about the wiring? Looks beautiful.
Was just thinking about the singer 15 to use on a treadle. Are you familiar with the Japanese 15 clones? I find them easier to use for free motion applications because they have a dial for dropping the feed dogs that Singer 15's don't have. Their bodies are mostly the same as a Singer, but the dial is a great improvement and they can be easily mounted on a treadle. Have seen some go on clist and ebay for $20. I think they are great machines.
I have one treadle with an old 15, a gingerbread Tiffany. It runs very well, but doesn't have reverse. The new treadle stand, that needs refinishing, is going to be for a Singer 237 that is just begging to go in. This new 15 could go in as a swap sometime if the need arose. The 237 is so I can treadle zig zag.
Post a Comment